3D aluminium skin for PVC glue

Aluminium skin for PVC glue 

 

The aluminium skin doing this time would be the PVC glue from student that is studying Architecture in ratio 2:1. 

















First of all, the aluminium sheet would be cut into appropriate size according to the wood template with the cutting machine shown on left. (Do not remove the blue coloured protector at this point) 



















Remove the protector and you will get a smooth surfaced aluminium sheet.

















Use the Marker to draw across the wood template on the aluminium sheet. (1~2cm thicker than the wood template)  













Use this blue cutter to cut the sheet that has been marked roughly first. (It is easier to use this machine than the hand cutter)

















Next step is to use this hand cutter to cut the sheet more precisely. **Red coloured hand cutter is for right-handed user and green coloured hand cutter is for left-handed user.**















Use the rasp to rub the sharp corner in order to create better shaped aluminium skin.

















The next step is to use this machine to curve the aluminium sheet a bit because the template provided has curve shape for the outlook.















Then, use hammer to tap the edges of the aluminium sheet because we are wrapping the aluminium sheet of half of the wood template. At this point, the aluminium sheet is still needed to be adjust. Use the marker to mark the unwanted part and cut it.














The head of the PVC glue is a bit inward than the body of the glue. Therefore, mark the surface that curved inward. Then, use the hammer to tap it carefully.












**The aluminium skin for the PVC glue is done!**